Washer Shaking Violently? Suspension Rod Fix

A top-load washer was shaking so hard it moved across the garage. Worn suspension rods were the cause, and the water lines were reversed too.
KitchenAid Dishwasher Not Cleaning? Circulation Pump Fix

A KitchenAid dishwasher left dishes dirty and detergent undissolved. The circulation pump motor had failed. Here is the repair and how to test it.
Commercial Refrigerator Too Warm? San Clemente Cafe Fix

A San Clemente cafe’s commercial refrigerator was running warm. A burned-out condenser fan motor and a dust-packed condenser were the cause.
Whirlpool Dryer Not Starting? Failed Motor Fix

A Whirlpool electric dryer would not start. The drive motor had failed and was fused to the blower, so both were replaced. Here is the job.
Dryer Needs Three Cycles? Gas Valve and Vent Blockage

A dryer needed three cycles to dry one load. A faulty gas valve and a vent packed with lint were the cause, and the lint was a genuine fire risk.
Clothes Wet After Spin? Drain Pump and Sensor Fix

A washer left clothes soaking wet, but only sometimes. A worn drain pump and a failing water level sensor together explained the intermittent fault.
46-Year-Old Sub-Zero Rebuilt: Full System Overhaul

A Sub-Zero refrigerator that ran for 46 years had a warm freezer. We rebuilt the sealed system: both compressors, condenser, evaporator, tubing.
Viking Oven Not Holding Temperature? Thermostat Fix

A Viking oven would not reach or hold temperature. A failed thermostat and an out-of-calibration temperature sensor were both responsible.
Dryer Not Drying? Igniter, Flame Sensor and Blocked Vent

A dryer had stopped drying efficiently. Three faults were behind it: a burned-out igniter, a failed flame sensor and a blocked ventilation system.
